Safety Equipment

Helmets:

Acceptable helmets:
• FIA 8860-2010
• FIA 8859-2015
• Snell 2020 SA, or M 2020 D or M 2020 R
• Snell 2015 SA, or 2015 M
• Snell 2010 SA, 2010 SAH, or 2010 M (expiry 31.12.2023)
• SFI Foundation 31.1/2015
• SFI Foundation 31.1/2010
• ECE R22.05 ECE 22.05 (expiry: ten years after date of manufacture as noted on unaltered, helmet label)
Helmets homologated to Snell M, ECE 22.05, and ECE R22.05 standard are not acceptable for use in vehicles equipped with roll cages

Safety Harness:

When an OEM seat is replaced by a competition seat, it is highly
recommended that the replacement seat shall meet the FIA standard
8815-1999 or 8862-2009.
When a safety harness (2 lap straps, 2 shoulder straps and 1 or 2 crouch strap/straps) is used, it must meet one of the following standards:
— FIA Standard 8853-98;
— SFI 16.1;
— SFI 16.5.
Validity of Safety Harnesses
— FIA 8853-98 –The expiry date is identified on the FIA label which is affixed to each part of the harness.
— SFI 16.1 or 16.5 – The expiry date is two years from the date of
manufacture which is on the SFI label which is affixed to each part of
the harness.
Note: It is not permitted to mix parts of different safety harnesses.
Only complete sets may be used.

Head & Neck Restraints:

Roll Over Protection:

AutoSlalom Rules Appendix C&D – 2021 Roll Bar & Roll Cage